The CombiMaster range from rational with a wide range of features & usability options. The CombiMaster ovens come with one of the largest customisation option ranges there is enabling you to create your perfect oven which is suited to your exact needs. A hot-air steamer conforming to DIN 18866 for most of the cooking methods used in commercial kitchens for the optional use of steam & hot air individually in succession or in combination. Complete with 5 programmable air speeds, 100 cooking programs each with up to 6 steps & an internal probe for accurate core temperature measurement.
The useful mode selector control enables for simple operation with separate controls for temperature, core temperature & time settings. Each making this unit seamless to use with simple operation controls.
This product comes with some very unique & useful features, such as a special designed USB interface making this unit even easier to operate. Integral, maintenance-free grease extraction system with no additional grease filter as well as a seamless hygienic cooking cabinet with rounded corners, cabinet with splash guard which stops water from spilling out enabling you maintain your machine easier & provides a useful health and safety benefit.
Gas & electric versions are also available of each model.
Marine & Prison versions available of each model
Left Stop for Appliance Door - The appliance door can be ordered to a left stop rather than right, making the appliance easier to use in some establishments.
Mobile Oven Rack Package - The internal hanging racks are replaceable with a mobile oven rack - makes unloading your rational appliance simple & comfortable.
Connecting to energy optimization systems - For connecting to energy optimization systems & operating control systems.
Rack Signalling - In iLC mode, the LED lighting indicates which rack can be loaded or unloaded.
Safety Door Lock - The safety door lock protects against injury from hot steam.
3 Externally attachable core temperature probes - With the 3 core temperature probe & iLevelControl option, you can prepare different foods at the same time. (For appliances with right hand doors only)
Sous-vide core temperature probe (Externally attached) for vacuum cooking - The extremely thin & elastic sous-vide core temperature probe is used for cooking with vacuum sealed bags. The vacuum is not destroyed by inserting the probe. (For appliances with right hand doors only)
Externally attachable core temperature probe - The core temperature probe can be attached to the outside of the appliance if required using a connecting socket. (For appliances with right hand doors only)
Integrated fat drain - Any drops of grease are reliably caught in the cooking cabinet & diverted to special grease drip containers.
Prison Version - Protects the Rational appliance against deliberate damage or vandalism. Also prevents it being misused to perpetrate violence against other people. (For appliances with right hand doors only)
Lockable control panel - The control panel is protected with a robust & durable lockable door. (For appliances with right hand doors only)
Marine Version (For electrical appliances only) - Suitable for passenger ships & marine applications. Keeps the operator safe while maintaining functionality - even in rough seas.
Mobile Appliances - Special frame with 4 stainless steel castors & parking brake for mobile uses.
Ethernet Port - Enables you to incorporate the rational appliance into a network. Appliance link is also possible with an appliance remote control & monitoring from iPhone/iPad using the Rational Remote App.
Stand UG I - Open on all sides - W: 843mm | D: 587mm | H: 671mm
Stand UG II - 14 Pairs of supporting rails. Side walls & top closed, rear side open - W: 843mm | D: 724mm | H: 671mm
Stand UG II bakery stand - 10 Pairs of supporting rails 400x600mm, side panels & top closed, rear panel open - W: 843mm | D: 732mm | H: 671mm
Stand UG II bakery stand UltraVent - 18 Pairs of supporting rails 400x600mm, side panels & top closed, rear panel open, raised to 931mm - W: 843mm | D: 732mm | H: 931mm
Base Cabinet US III - 14 Pairs of supporting rails. - W: 843mm | D: 724mm | H: 671mm
Base Cabinet US III UltraVent - 20 Pairs of supporting rails. Side panels, top & rear panel raised to 931mm - W: 843mm | D: 724mm | H: 931mm
Base Cabinet US IV - 14 Pairs of supporting rails. 2 Double wing doors, closed on all sides - W: 843mm | D: 724mm | H: 671mm
UltraVent Condensation Hood - The condensation technology in UltraVent absorbs & dissipates steam. Simple installation & can be retrofitted at any time. - W: 854mm | D: 1,226mm | H: 450mm
UltraVent Plus Condensation Hood - In addition to the UltraVent technology, UltraVent Plus is equipped with special filters. This prevents both vapours & the lingering smoke that builds while grilling & roasting. - W: 854mm | D: 1,226mm | H: 628mm
Extractor Hood - Steam is automatically fan-extracted when the cabinet door is opened. Simple installation & can be retrofitted at any time. - W: 854mm | D: 1,226mm | H: 445mm
Catering Kit - These accessories are fixed under the appliance in place of the standard feet. The supporting bar along the side is both for protection & handling.
Base Cabinet UG II Catering - 14 Pairs of supporting rails. Closed top & side panels, rear panel open, reinforced at the sides. Four stainless steel castors (200mm). Must be used in conjunction with "catering kit".
Match perfectly with Rational Appliances & are manufactured with the highest quality stainless steel whilst meeting the highest requirements. Ergonomic design for fast loading & use.
Mobile Plate Rack - The Mobile Plate Rack allows you to complete up to 32 finished plates (up to 31cm diameter)
Mobile Oven Rack - For fast & comfortable loading & unloading of the Rational appliance. Can only be used in conjunction with the run-in rail.
Run in Rail - You will need the run-in rail if you are using a mobile oven rack
Transport Trolley - The transport trolley is the perfect supplement to the mobile oven rack. It is used for loading & unloading outside of the appliance & for safely moving food. Perfectly matched to the heights of the the Rational stands & cabinets.
Many different versions with different rail spacing & dimensions make them flexible to use.
Flow Guard - For extracting the exhaust gases via a pipe (180mm diameter)
This product has not been reviewed yet.
Minimum order total is now €150.00.
All orders over €200 Ex VAT are free from delivery charges. Delivery is €15 Ex VAT for orders under €200 Ex VAT. We offer a 10 working day delivery on stock items. Any items that are not standard stock items may take up to 28 days to arrive. An estimated delivery date will be displayed at the checkout and is dependent on the items ordered. In some rare circumstances, there may be an increased delay but we endeavor to inform you as soon as possible on the product page or by email. If you have a query regarding stock, please call before placing your order.
We are currently not dispatching to Europe and Worldwide, due to Customs regulations.
PLEASE NOTE WE ARE A UK BASED COMPANY AND THERE ARE NEW REGULATIONS WITH CUSTOMS CHARGES FOR CUSTOMERS ACCEPTING DELIVERIES.
TO COMPENSATE THESE CHARGES WE WILL NOT CHARGE VAT ON ORDERS, AS THEY ARE NOW CLASSED AS AN EXPORT.
Orders can be cancelled anytime until the order has been dispatched. You can cancel your order by contacting us through email or phone.
At BuyCatering we want you to be happy with your new purchase, if you are not completely satisfied with your purchase, under Distance Selling Regulations you have 14 days to return the items in a saleable and unused state. Contact our returns department on 1800 930 222 who will then authorise a return where goods will be inspected. We will then offer a refund or alternative item. Returns notified after 14 days will not be accepted unless under extreme circumstance and will be subject to a 25% restocking charge. Customers are responsible for the return carriage costs unless the product is faulty.